Siemens® Definition AS 40 (#377)
(40-Slice Scanner)
Manufactured: 2009
Condition: refurbished by MEDSER
Location: MEDSER Showroom, Heusenstamm/Frankfurt
Tube: Straton MX-P46
Gantry
| Aperture | 78 cm |
| Scan Field | 50 cm |
| Tilt | +/- 30° |
| Rotational times | 0.33, 0.5, 1.0 s |
Detector
| Number of detector rows | 20 |
| Max. slices / rotation | 40 |
| Field of view | 50, 65 HD, 80 Extended cm |
Image Reconstruction
| Reconstruction time | up to 20/40 images/s |
| Reconstruction slice widths | As low as 0.33 mm |
| Slice increment | 0.1–10 mm |
| Pitch factor (Volume Pitch) | Up to 1.5 |
| Scan length | max. 160 cm |
| Spiral scan time | Max. 100 s |
Tube Assembly
| Tube | STRATON |
| Tube current range | 20–800 mA |
| Tube voltages | 70, 80, 100, 120, 140 kV |
| Anode heat storage capacity | 50 MHU (cooling rate of 7.3 MHU/min) |
| Focal Spot size according to | 0.7 x 0.7 mm/7° |
| IEC 60336 | 0.9 x 1.1 mm/7° |
Patient Table
| Max. table load | 220 kg |
| Table speed | 2–200 mm/s |
| Vertical table travel range | 48–92 cm (at table top) |
| Vertical travel speed | 20-50 mm/s |
| Scanable range (metal-free) | 160 cm |
Installation
| Examination room Temperature range | 18–28° C |
| Heat dissipation air-cooled | Max. 12 kW |
| Heat dissipation water-cooled | Max. 12 kW |
| Relative air humidity (no condensation) | 20-75% |
| Surface area for installation | 18 m2 (24 m2 incl. equipment room) |
| Generator power | 100 kW |
| Nominal line frequency | 50; 60 Hz |
| Max. power connection | <70 kVA |
| Power consumption System on standby | <4.0 kVA |
| Power consumption scanning | 125 kVA (at 80 kW)
140 kVA (at 100 kW) |
| Nominal voltage 3/N~ | 220-480 V in 20 V steps |
Included Specifications
CARE Applications
- Adaptive Dose Shield
- CARE Filter
- CARE Topo
- CARE Dose4D
- Automated real-time tube current adjustment for best diagnostic image quality at lowest possible dose, independent of patient size and anatomy.
- Fully automated dose management for adults and children with up to 60% dose reduction
- CARE Bolus CT
FAST CARE Technology
- Faster workflow
- Lower radiation exposure
- Highly reproducible results
- Easily adjustable parameters
System Software
- Syngo Examination
- Syngo Viewing
- Syngo Filming
- Syngo Archiving & Network
- Syngo Service Solutions
- Image Filter
- SureView
- SOMATOM LifeNet
- Video Capture and Editing Tool
- Scan Protocol Assistant
- E-Logbook
Applications on Syngo
Acquisition Workplace
- Real-time MPR
- Syngo 3D SSD (Surface Shaded Display
- Syngo Volume Calculation
- Syngo Dynamic Evaluation
- Syngo VRT (Volume Rendering Technique)
- CT-Angiography
- Neuro BestContrast
- 4D Noise Reduction
- Adaptive Signal Boost
- Adaptive Signal Boost
- WorkStream4D
Slice upgradeability
- Full on-site slice configuration from 20 to 128
System Hardware
- Multislice UFC (Ultra Fast Ceramic) Detector
- Z-Sharp Technology
- 0 MHU STRATON X-ray tube
Extra Specifications
Options
- 3D advanced editor
- 3D Boneremoval
- 3D Minimum Intensity Projection
- 3D multiplanar reformatting
- 3D shaded surface display
- 3D volume editor
- 3D Volume Rendering
- Bolus-Track
- CARE Dose Adjust
- CARE Dose Auto kV
- CARE Dose Dashboard
- CARE Dose Modulation
- CARE Dose Profile
- CTApp Minimum Intensity Projection
- Dicom modality performed procedure step support
- Dicom SR-Viewer
- Dicom Worklist
- MR-Support-i
- Volume Workflow
